Previous Ip Address - Cisco Prisma II Installation And Operation Manual

Chapter 3 Operation using ICIM
Variable
p2RemoveModuleIndex
p2RemoveModuleChassisID
p2RemoveModuleSlotID
p2RemoveModuleName
p2RemoveModuleType
p2RemoveModuleSerialNum

Previous IP Address

This variable is named p2PreviousIP. When the IP of the ICIM is changed using the
front panel, this variable returns the previous ICIM IP address. It returns 0.0.0.0 until
the IP address of the ICIM is changed for the first time.
70
Description
The index for this table. The most recently removed
module is always in index position 1.
The chassis ID number of the removed module.
The slot ID number of the removed module.
The name of the removed module. This is the name
from the plug-and-play data for this module, and
matches what the ICIM and SNMP display as the
name. TNCS and LCI may use a different name.
The TNCS type number of the removed module. This
number uniquely identifies every type of module.
The serial number of the removed module. This
information is needed to determine if a module has
been replaced with one that is the same type.
78-4015908-01 Rev F