Checking The Operating Status; To Check Operating Status Using Lci - Cisco Prisma II Installation And Operation Manual

Chapter 4 Operation using LCI

Checking the Operating Status

To Check Operating Status using LCI

Using the LCI, you can check the status of all operating parameters of this module.
1 In the module tree, right-click the module, and then click Details.
Result: The Module Details window appears. The monitored parameters are
displayed under Parameters and Status.
2 Check the operating parameters.
Note: For details on all operating status parameters, see Module Parameter
Descriptions (on page 107).
92 78-4015908-01 Rev F