Checking The Module Alarms Using Lci; To Check Alarms Using Lci - Cisco Prisma II Installation And Operation Manual

Checking the Module Alarms using LCI

Using LCI, you can check the alarm status of various parameters. Alarms that you
can check are listed below.
Alarms limits fall into one of the following categories.
Major low

Minor low

Minor high

Major high


To Check Alarms using LCI

Right-click the module, and then click Details.
Result: The Module Details window appears. The alarms are shown under
Parameters and Alarms.
78-4015908-01 Rev F

Checking the Module Alarms using LCI

95