Checking Alarms Using The Icim; To Check Alarms Using Icim - Cisco Prisma II Installation And Operation Manual

Checking Alarms using the ICIM

To Check Alarms using ICIM

Alarms fall into one of the following categories.
Major low

Minor low

Minor high

Major high

If the red ALARM LED on the front panel is blinking, a minor alarm condition is
indicated. If the ALARM LED on the front panel is illuminated, a major alarm
conditions is indicated.
1 From the MAIN menu, press the
2 Press the
Press the
3
Result: The Slot field is highlighted.
4 Press the
5 Press the
Result: The MODULE menu displays on the ICIM.
Press the
6
Result: Module alarm conditions display.
7 Use the
desired alarm is displayed.
8 Monitor the alarm condition(s). Take appropriate action. Verify that all settings
and thresholds relating to the alarm indication are set correctly to rule out an
unintended alarm.
9 When finished, press the
78-4015908-01 Rev F
SEL
key to address the Shelf number. Then press the
keys to scroll to the number of the desired shelf.
ENTER
key.

key or the
ENTER
key.
ALRM
key.

key or the

key to highlight the Shelf and Slot fields.
key to Scroll to the number of the desired slot.

key to scroll through alarm conditions until the
MAIN
key to return to the MAIN menu.

Checking Alarms using the ICIM


key or the
59