Adjusting Alarm Thresholds; To Adjust Alarm Thresholds - Cisco Prisma II Installation And Operation Manual

Chapter 3 Operation using ICIM

Adjusting Alarm Thresholds

To Adjust Alarm Thresholds

Relative alarm thresholds are both displayed and stored as relative values. This
method for adjusting alarm thresholds lets you choose any valid increment size and
adjust the alarm threshold to any valid value.
You can use the ICIM to change the adjustable alarm thresholds of this module from
their factory default values.
1 At the MODULE menu, press the
Result: The STATUS menu appears on the ICIM LCD.
Press the
2
label n/a is displayed, you cannot configure that alarm threshold. Press the
key to highlight the alarm threshold for the next parameter.
When the threshold that you wish to set is highlighted, press the
3
Press the
4
Press the
5
Note: Press the Cancel (
Press the
6
Result: Data Saved displays.
7 When finished, press the
74
SEL
key. The alarm thresholds previously set are displayed. If the
 
key or the

key or the
ALRM
ENTER
key to save the changes.
MAIN
STAT
key.
key to change the increment size.
key to adjust the alarm threshold.
) key to return to the previous menu.
key to return to the MAIN menu.

ENTER
key.
78-4015908-01 Rev F