Checking Manufacturing Data Using Lci; To Check Manufacturing Data Using Lci - Cisco Prisma II Installation And Operation Manual

Checking Manufacturing Data using LCI

To Check Manufacturing Data using LCI

Using LCI, you can check the manufacturing data of the module.
1 In the module tree, right-click the module, and then click Details.
Result: The Module Details window appears. The manufacturing data is
displayed under Properties.
2 Proceed with viewing the manufacturing data.
Note: For details on all manufacturing data parameters, see Module Parameter
Descriptions (on page 107).
78-4015908-01 Rev F

Checking Manufacturing Data using LCI

99