Cisco Prisma II Installation And Operation Manual page 135

Parameter ICIM
Name (LCI) Abbreviation
AGC 1 Set AGC1set
Control
AGC2set
AGC 2 Set
Control
Receiver 1 Mode Mode1
3
Receiver 2 Mode Mode2
3
Receiver 1 Alarm Alarm1
3
Alarm2
Receiver 2 Alarm
3
Receiver 1 Red1Chas
Redundant ID
Chassis
3
Receiver 2 Red2Chas
Redundant ID
Chassis
3
Receiver 1 Red1Slot
Redundant ID
Slot
3
Receiver 2 Red2Slot
Redundant ID
Slot
3
Receiver 1 Red1Sub
Redundant ID
Rcvr
3
Receiver 2 Red2Sub
Redundant ID
Rcvr
3
Visible in LCI in Master mode only.
1
In the Set state, the optical AGC functions as if in Manual mode. When the state is changed
2
to Lock, the user Attn setting and optical input power are locked into calibration settings for
the optical AGC function.
Visible in LCI in Independent mode only.
3
78-4015908-01 Rev F
Description
In the Set state, the Rx1 or Rx2 AGC
functions as if in Manual mode.
When the state is changed to Lock,
the user attenuation setting and
optical input power are locked into
the cal settings for the AGC
function.
Independently selects Master or
Slave mode operation for Rx1
(Mode1) and Rx2 (Mode2).
Forces an alarm on Rx1 (Alarm1) or
Rx2 (Alarm2).
Identifies the chassis in which the
redundant mate for Rx1 (Red1Chas)
or Rx2 (Red2Chas) is located.
Identifies the slot in which the
redundant mate for Rx1 (Red1Slot)
or Rx2 (Red2Slot) is located.
Identifies the receiver (1 or 2) that
serves as the redundant mate for
Rx1 (Red1Sub) or Rx2 (Red2Sub).
Receiver Parameters
Values Default
Set or Lock Lock
2
Slave or Master Master
On or Off Off
1 to 99 1
1 to 32 1
1 or 2 1
111