To Change The User Password - Cisco Prisma II Installation And Operation Manual

Chapter 3 Operation using ICIM
When User Psw/Shift Off appears, press the
3
then enter the eight digits of your password, using the 0-9 number keys.

To change a digit you have just typed, use the CAN (Cancel) function by
pressing the
4 Press the
updates to show whether your password entry was accepted.
 If the password is accepted, the word Accepted appears in the menu, and
you are able to return to the MAIN menu.

If the password was rejected, the word Rejected appears in the menu.
Reasons for a password to be rejected include:
–
–
–
If the password is rejected, press the
menu and re-enter the password as described in step 3 above.
I C I M
S h e l f
S l o t
U s e r P s w
S h i f t O f f

To Change the User Password

If a user password has been entered, it may be changed. However, the current
password must be active prior to changing it. If the current password has expired
(more than 10 minutes have passed since your last keystroke), you must re-enter the
current password before changing to a new one.
1 Access the Password menu as shown in the procedure To Access the Password
Menu (on page 46).
Use the
2
Press the
3
48
ALRM
key. This deletes the last digit typed.
ENTER
key to enter the password. The ICIM2 or ICIM2-XD display
Entering more than eight digits for the password.
Pressing keys other than the 0-9 number keys.
Entering an incorrect password if a valid password has been entered.
I C I M
S h e l f 0
0
S l o t 1 5
1 5
U s e r P s w
* * * * * * * *
S h i f t O n

key to scroll down until Change Psw is highlighted.
SEL
key to select Change Psw.
SHIFT
key to display Shift On, and
SHIFT
key to return to the password
I C I M
S h e l f
S h e l f 0
S l o t
S l o t 1 5
U s e r P s w U s e r P s w
1 2 3 4 * * * * 1 2 3 4 5 6 7 8
R e j e c t e d A c c e p t e d
S h i f t O f f
S h i f t O f f
I C I M
0
1 5
TP013
78-4015908-01 Rev F