Configuring The Module Using The Icim; To Configure Parameters Using The Icim - Cisco Prisma II Installation And Operation Manual

Configuring the Module using the ICIM

To Configure Parameters using the ICIM

You can use the ICIM to configure the parameters of this module.
1 From the MAIN menu, press the
2 Press the
Press the
3
Result: The Slot field is highlighted.
Press the
4
Press the
5
Result: The MODULE menu appears on the ICIM LCD.
6 To configure the module, press the
7 Press the
until you find the parameter of interest.
8 Press the
9 Press the
control.
10 Press the
78-4015908-01 Rev F
SEL
key to address the Shelf number. Then press the
key to scroll to the number of the desired shelf.
ENTER
key.

key or the
ENTER
key.

key or the
SEL
key to select the highlighted control.

key or the
ENTER
key to save the changes and return to the MAIN menu.

key to highlight the Shelf and Slot fields.
keys to scroll to the number of the desired slot.
CFG
key.

key to scroll through the configurable controls
key to activate or change the value of the selected

Configuring the Module using the ICIM


key or the
57