Back Panel Connectors - Cisco Prisma II Installation And Operation Manual

Back Panel Connectors

Blind-mate connectors make it easy to install this module. The push-on connector on
the back of the module mates with the back plane bus connector inside the chassis.
This 55-pin connector and the two RF connectors provide the following facilities.
RF signal connection

Electrical power input connection

Alarm communications connections

Status-monitoring communications

Communications and control connections

The ESD guide pin near the bottom of the back panel serves as both a guide pin and
an ESD ground connection. The length of the pin ensures that ground is the first
electrical connection made as the module is inserted, and the last connection to be
broken as the module is removed.
78-4015908-01 Rev F
High Density Dual Reverse Receiver Front and Back Panel
7