To Access The Password Menu; Expired Password Or Inactive Password Messages; To Enter The User Password - Cisco Prisma II Installation And Operation Manual

To Access the Password Menu

The Password menu allows you to create, enter, change, or disable the user
password. It also allows service personnel to use the factory default password.
1 Press the
2 Use the
Press the
3
M A I N
O f f l i n e
M o d u l e s
A l a r m s
S c r o l l
M o d u l e
S h e l f
S l o t

Expired Password or Inactive Password Messages

The entry of a valid password allows changes to system parameters for a period of
10 minutes. If more than 10 minutes has passed since your last keystroke, and you
attempt to make any changes to system parameters, the menu displays Psw Expired.
If, after more than 10 minutes, you attempt to disable the password the menu
displays Failed, Password Not Active. If either of these messages is displayed, you
are required to re-enter the password. To re-enter the password, follow the
procedure in To Enter the User Password (on page 47).

To Enter the User Password

To use the user password feature, you must create and enter a password of exactly
eight digits using only the 0-9 number keys.
The password remains active for 10 minutes after your last keystroke. To change
configuration parameters after 10 minutes, you must re-enter your password.
Complete the following steps to enter a user password.
1 Access the Password menu as shown in To Access the Password Menu (on page
46).
2 Press the
78-4015908-01 Rev F
ICIM
key.

key to scroll down until Password is highlighted.
SEL
key. The Password menu appears. User Psw is highlighted.
I C I M
S h e l f
S l o t
M f g D a t a
0
P a s s w o r d
0
I P S e t u p
U p d a t e A d r
SEL
key. The user password menu appears.
I C I M
7 S h e l f 7
1 5 S l o t 1 5
M f g D a t a
P a s s w o r d
I P S e t u p
U p d a t e A d r
ICIM Password
I C I M
S h e l f 7
S l o t 1 5
U s e r P s w
S A P s w
C h a n g e P s w
D i s a b l e
P s w
TP012
47