Unit For Amount Of Water / Time Format - Jura GIGA X8 Instructions For Use Manual

Unit for amount of
water / time format
T Move your finger across the display until
displayed in the center.
T Touch 'Water
'Water hardness'
T Now move your finger to the left or right to change the
setting.
T Touch 'Save'.
'Saved' appears briefly on the display.
'Water hardness'
T Touch
'Back' the number of times needed to display the start
screen again.
You can change the unit for the amount of water as well as the time
format in programming mode
U
'Change units' ('ml'
U
'Set time format' ('24 hrs.'
Example: Proceed as follows to change the unit for the amount of
water from 'ml' to 'oz'.
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Machine settings'
T Press the Rotary Switch.
'Switch off after'
T Move your finger across the display until
in the center.
T Touch 'Units'.
'Units'
T Now move your finger to the left or right to change the
setting to 'oz'.
T Touch 'Save'.
'Saved' appears briefly on the display.
'Units'
T Touch
'Back' the number of times needed to display the start
screen again.
4 Permanent settings in programming mode
hardness'.
('Machine settings'
/ 'oz')
/ 'AM / PM')
'Machine settings'
'Water hardness' is
/ 'Units'):
is displayed.
'Units' is displayed
31