Rinses; Unit Amount Of Water / Time Format - Jura IMPRESSA XS95 Manual

5 Permanent settings in programming mode

Rinses

Unit amount of water /
time format
42
You can set whether the switch-on rinse should be started manually
or automatically.
You can set whether cappuccino rinsing should be prompted imme-
diately or 10 minutes after a milk product has been prepared.
Example: Proceed as follows to programme that Cappuccino rinsing
should be prompted immediately after a milk product has been
prepared.
Precondition:
COFFEE READY
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
appears.
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
INIT RINSE MANUAL
g T Turn the Rotary Switch until
is displayed.
k T Press the Rotary Switch to enter the programme item.
CAPP RINSE AFTER 10'
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED w
CAPP RINSE NOW
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit the programme item.
RINSES
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
You can change the unit of the amount of water from 'ml' to 'oz' and
the time format to '24 HRS' or 'AM/PM' .
Example: To change the unit for the amount of water from
, proceed as follows.
OZ
Precondition:
COFFEE READY
T Open the cover of the Rotary Switch.
is displayed.
is displayed.
RINSES
CAPP RINSE AFTER 10'
CAPP RINSE NOW
appears briefly on the display.
is displayed.
EXIT
is displayed.
EXIT
is displayed.
MAINTENANCE
is
to
ML