Unit For Amount Of Water / Time Format - Jura GIGA X3c Instructions For Use Manual

4 Permanent settings in programming mode
Unit for amount of water /
time format
30
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Switch off after'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Water hardness'
T Now move your finger to the left or right to change the set-
ting.
T Touch 'Save'.
'Saved' appears briefly on the display.
'Water hardness'
T Touch
'Back' the number of times needed to display the start
screen again.
You can change the unit for the amount of water as well as the time
format in programming mode
U
'Change units' ('ml'
U
'Set time format' ('24 hrs.'
Example: Proceed as follows to change the unit for the amount of
water from 'ml' to 'oz'.
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Switch off after'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Change units'
T Now move your finger to the left or right to change the set-
ting to 'oz'.
T Touch 'Save'.
'Saved' appears briefly on the display.
'Units'
'Machine settings'
'Water hardness'
('Machine settings'
/ 'oz')
/ 'AM / PM')
'Machine settings'
'Change units'
is displayed.
is displayed.
/ 'Units'):
is displayed.
is displayed.