Unpacking; Check The Packaging; Unpack Your System; Check Your Packing List - Micron ClientPro XVI User Manual

Check the Packaging

As soon as the packages containing your new system arrive, carefully inspect them for
any signs of damage. In particular, look for wrinkled or bent corners, holes, or other signs
of bad handling or abuse. If you notice any damage to the packaging, immediately open
the boxes and inspect the contents for damage. Pay close attention to the components
near the area where the packing material was damaged.

Unpack Your System

Caution: If your system arrives in cold weather, do not unpack the computer or the
monitor until they have been allowed to come to room temperature. Immediately
exposing them to the warm room may cause condensation to occur, which may damage
the units. If condensation does occur, allow the units to completely dry before operating
them.
After you have determined that the packaging is undamaged follow these steps:
1. Unpack and carefully inspect your system.
2. Taking care not to damage the packing material, carefully open the cardboard
box containing the computer and remove the system unit, keyboard and any
other accessories that you may have ordered.
3. Carefully unpack the monitor and all accessories from the monitor package.
Be careful not to damage the packing material.
4. Inspect all items for damage that may have occurred during shipment.
For your protection, report any damage to the shipper immediately.
We highly recommend that you save the packaging in the event that you need to move
or ship the system some time in the future.

Check Your Packing List

Now that you have everything out of the packages, take the time to check the packing
list to be sure you received everything. If you discover that an item is missing, call Micron
Electronics, Inc. immediately to receive a replacement. Refer to Appendix A for contact
information.
1-2
Micron ClientPro X

Unpacking

User's Guide
VI
Micron Electronics, Inc.