Running Your System For The First Time; Turning Off Your System - Micron ClientPro XVI User Manual

Running Your System for the First Time

1. Power up the monitor. If you are unsure about how to go about this,
please refer to the monitor's manual for more information.
2. Remove any floppy disks from the floppy drives.
3. Power up the computer system by firmly pushing and releasing the On/Off button
on the front panel of the system. The power indicator should light up and
the fan and hard drive should begin to run.
The system diagnostics begins at this time. The keyboard is initialized indicated by the
keyboard LEDs blinking momentarily. The Num Lock LED remains on. Next, the screen
initializes and a message indicating what type of video adapter is installed . The memory
will be counted and tested.
Finally, the system is booted.
If you experience any problems during the power up sequence, please refer to
Chapter 4, "Common Problems."

Turning Off Your System

Micron recommends that you power down your system in the following order:
1. Exit all applications you are running and save any changes.
2. Make sure that ALL disk activity has completely stopped. The
floppy and hard drive indicator lights should be off and the
floppy drive motors should be stopped. Hard disks continue to spin
until the system power is shut off.
3. Turn off the computer system, then the monitor.
Micron Electronics, Inc.
Chapter 1: Setting Up Your System
1-11