Micron ClientPro XVI User Manual page 57

Plug and Play Configuration
Configuration Mode
Sets how the BIOS gets information about ISA cards that do not have Plug and Play
capabilities. The options are Use Setup Utility and Use ICU (ISA Configuration
Utility). If Use ICU is selected, the BIOS will depend on run-time software to ensure
that there are no conflicts between ISA boards with Plug and Play capabilities and
those without. Only Boot With PnP OS will be visible.
Boot with PnP OS
Enables the PC to boot with an operating system capable of managing Plug and
Play add-in cards. The options are None, Other, and Windows95.
ISA Shared Memory Size
Enables you to "unshadow" a block of the upper memory area. The options are
Disabled, 16 KB, 32 KB, 48 KB, 64 KB, 80 KB, and 96 KB. If this is set to Disabled,
the ISA Shared Memory Base Address (described below) will not be visible.
Shadowing is a technique that copies a block of memory from an add-in card's ROM
to the same address in system memory. This provides faster access and achieves
higher performance. By default, all upper memory is shadowed.
3-18
Micron ClientPro X
Figure 3-9. Plug and Play Configuration Screen
User's Guide
VI
Micron Electronics, Inc.