Micron ClientPro XVI User Manual page 11

7. Find the video cable and attach the appropriate end into the monitor (if not
already attached) and attach the other end into the video connector (located in
one of the expansion slots at the rear of the unit). If the connection is loose on
either end, tighten the integrated screws at both ends of the cable for a secure
connection. For more information about the setup, use, and maintenance of your
video monitor, please refer to the manual that was supplied with it.
8. Insert the ends of the keyboard and mouse cables into the keyboard and mouse
connectors at the rear of the computer system. Take care, for the connectors
are keyed in such a way that the plugs can only be inserted if oriented correctly.
Refer to the case drawings on the following pages for the location of the
proper connector. If it does not plug in easily, do not force it.
Your system should now be ready to use. You may have other devices or peripherals
to install, but it is best to ensure the basic system is operating correctly before adding any
options.
1-4
Micron ClientPro X User's Guide
VI
Micron Electronics, Inc.