Maintenance; Operating Environment; Transporting; Cleaning - Micron ClientPro XVI User Manual

Micron ClientPro X User's Guide
VI

Maintenance

Operating Environment

Your Micron computer has been manufactured to the highest standards. With proper
care, it should provide years of trouble-free service.
To ensure that your system has the longest life possible, it should be placed in an area
with good ventilation and low humidity, out of direct sunlight and away from heat sources
or lamps. Be sure the rear cooling-fan opening is not obstructed as it is necessary to keep
the system cool. Never expose the system to moisture of any sort, for this could lead to
fire or shock hazard. Stay away from areas with high levels of dust, dirt, or smoke.

Transporting

Always shut the system off before moving it. Any sudden jar or shock may permanently
damage the hard drive. Hard drives are more resistant to shock if they are shut down.
If you are transporting the system over a distance, it is a good idea to completely
repackage it in its original packing material. If the original packaging is unavailable, pack
all components with as much padding as reasonably possible to ensure that the units are
not exposed to excessive vibration or shock.

Cleaning

If the case becomes dirty through constant use or handling, use only a damp, dust-free
cloth. Do not use abrasives or solvents as these may mar or scratch the case. Window
cleaner and a cloth can be used to clean the monitor, if the monitor has been turned OFF
first. Never apply the window cleaner directly to the monitor screen. Always spray the
cloth first, then wipe down the screen.
Cleaning kits designed to clean floppy drives are available from most computer stores
and should be used periodically.
If you are operating your system in an environment heavy with smoke or dust, you should
occasionally open the unit and with great care, clean the components with a vacuum
(special vacuums are available just for this purpose). Be careful to not loosen any of the
components.
If liquid is spilled into the keyboard, immediately unplug it, allow the fluid to drain out by
tipping the keyboard upside down, and dry the keyboard overnight before using it again.
1-12 Micron Electronics, Inc.