Micron ClientPro XVI User Manual page 52

If either serial port address is set, the address it is set to will not appear
in the options dialog box of the other serial port. Example: With certain
video adapters installed, the COM4, 2E8h address will not appear in the
options dialog box of either serial port.
Parallel Port Address
Selects the address and IRQ of the parallel port. The options are Disabled; LPT3, 3BCh,
IRQ7; LPT1, 378h, IRQ7; LPT1, 378h, IRQ5; and LPT2, 278h, IRQ5. If the Configuration
Mode is set to Auto, the setup program assigns LPT1, 378h, IRQ7 as the parallel port
address, regardless of what is selected under the Parallel Port Address option.
Parallel Port Mode
Selects the mode for the parallel port. The options are Compatible, Bi-directional, EPP,
and ECP. The default is Compatible. Compatible means the parallel port operates in AT-
compatible mode. Bi-directional means the parallel port operates in bi-directional PS/2-
compatible mode. EPP and ECP mean the parallel port operates high-speed, bi-
directionally. This option is not affected by the Configuration Mode field above.
Peripheral Status Reports
Displays the current status of the various periphrals from the selectable settings
above. These are informational fields and are not accessible. There are no options.
Micron Electronics, Inc.
Chapter 3: The BIOS Setup Program
NOTE
3-13