Micron ClientPro XVI User Manual page 51

Micron ClientPro X User's Guide
VI
Figure 3-6. Perpherial Configuration Screen
Primary and Secondary IDE Interface
Enables or disables the PCI IDE hard disk interface. The options are Enabled and
Disabled.
Floppy Interface
Enables or disables the diskette drive interface. The options are Enabled and Disabled.
Serial Port 1 Address
Selects the address of the serial port. The options are Disabled; COM1, 3F8h; COM2,
2F8h; COM3, 3E8h; and COM4, 2E8h. If the Configuration Mode is set to Auto, the Setup
program assigns the first free COM port (normally COM1, 3F8h) as the serial port 1
address, regardless of what is selected under the Serial Port 1 Address option.
Serial Port 2 Address
Selects the address of the serial port. The options are Disabled; COM1, 3F8h; COM2,
2F8h; COM3, 3E8h; and COM4, 2E8h. If the Configuration Mode is set to Auto, the Setup
program assigns the first free COM port (normally COM2, 2F8h) as the serial port 2
address, regardless of what is selected under the Serial Port 2 Address option.
3-12 Micron Electronics, Inc.