Micron ClientPro XVI User Manual page 73

Problem
Read/write, sector, data, or seek errors occur when attempting to access
files on the hard drive.
Possible Cause
The format may be fading.
The hard drive may be developing media errors.
The file allocation table may be corrupted.
Solution
Using a file-by-file backup method, backup as much data as you
can, then reformat the drive. If the format is successful, use a disk
diagnostic software application to test the media of the drive (make
sure the application locks out any errors it finds to make them
inaccessible from DOS). Finally, restore your files from the backup
tape or diskettes.
4-10
Micron ClientPro X User's Guide
VI
Micron Electronics, Inc.