Installing Add-On Peripherals - Micron ClientPro XVI User Manual

Installing Add-On Peripherals

The ClientPro X
VI
be added to the system board. The following describes how to install the PCI card and
DRAM memory.
PCI Local Bus Card
PCI Local Bus slots accommodate most PCI-approved Local Bus cards. To install a
PCI Local Bus card:
1. Power OFF the computer system.
2. Locate an unused PCI slot on the ClientPro X
3. Insert the card with the bottom edge level. Never insert the card at an angle.
4. Holding the card at the center of the top edge, gently push straight in. Do not
force the card into place. If it does not fit, take it out and try again.
5. Make sure the card is fully inserted.
6. Secure the card with a bracket screw.
Micron Electronics, Inc.
Chapter 2: Technical Information
accommodates ISA and PCI Local Bus cards. Extra DRAM can also
.
VI
2-9