Ghosting (2)
Phaser 3250 Laser Printer Service Manual
There is ghosting at 75.5 mm intervals of the OPC Drum on the whole print.
Initial Actions
Check the paper transfer path.
Ensure there are no debris on the transfer path.
Verify the paper is within the printer specifications (refer to "Media and
Tray Specifications" on page 1-18).
Troubleshooting Reference Table
Applicable Parts
Troubleshooting Procedure Table
Step
Actions and Questions
1. Check the media type selection.
1
2. Is Thick Mode selected for paper
type?
Print-Quality Troubleshooting
Example Print
Residual Image/Ghosting
Yes
Complete.
No
Set the correct
media type.
5-23