Wrong Print Position - Xerox Phaser 3250 Service Manual

Wrong Print Position

Phaser 3250 Laser Printer Service Manual
Prints begin at wrong position on the paper.
Applicable Error Message

Wrong Print Position

Initial Actions
Try picking paper from a different tray.
Check the paper path for obstructions or debris.
Cycle printer power.
If the problem persists, refer to the following procedure.
Troubleshooting Reference Table
Applicable Parts
Feed Actuator, PL6.1.72
Feed Sensor (Photo Interrupter),
PL6.1.75
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the Feed Sensor for damage.
1
2. Is the Feed Sensor damaged?
1. Check the Feed Actuator for
2
damage.
2. Is the Feed Actuator damaged?
Error Messages and Codes
Wiring and Plug/Jack Map References
"Map 6 - Main Motor, Interlock Switch,
Fans, and Sensors" on page 10-14
Yes
Replace the
Feed Sensor
(page 8-49).
Replace the
Feed Actuator
(page 8-45).
No
Go to step 2.
Complete.
3-17