Paper Rolled On The Opc Drum - Xerox Phaser 3250 Service Manual

Error Messages and Codes

Paper Rolled on the OPC Drum

Applicable Error Message
Initial Actions
3-24
Paper is caught or rolled up in the OPC Drum.
Warning
The Fuser may be hot. Turn the printer power Off and allow at least 5 minutes
for the Fuser to cool before removing the Fuser.
Caution
Do not expose the Print Cartridge to light for more than 5 minutes. Cover the
Print Cartridge to avoid damage.
Do not touch the green surface underneath the Print Cartridge.

Paper Rolled on the OPC Drum

Ensure that the Fuser is secured to the printer.
Cycle printer power.
If the problem persists, refer to the following procedure.
Troubleshooting Reference Table
Applicable Parts
Print Cartridge, PL1.1.20
Fuser, PL9.1.0
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the paper type.
1
2. Does the paper type meet
specifications?
Wiring and Plug/Jack Map Reference
"Map 7 - LVPS, HVPS, Fuser, Developer
Unit CRUM, and Power Switch" on
page 10-15
Yes No
Replace the Go to step 2.
paper with the
correct
specifications.
Phaser 3250 Laser Printer Service Manual