Error Messages and Codes
3-8
Troubleshooting Procedure Table
Step
Actions and Questions
1. Check the Pick-Up Solenoid for
1
damage.
2. Is the Pick-Up Solenoid damaged?
1. Check the Paper Holder Pad on the
2
paper tray (page 8-8).
2. Is the Paper Holder Pad loose due
bad sealing of the side-pad?
3
1. Check the surface of the Pick-Up
Roller for damage or debris. Wipe
the Pick-Up Roller using a damp
cloth.
2. Is the Pick-Up Roller damaged?
4
1. Check the Feed Sensor for damage.
2. Is the Feed Sensor damaged?
Yes
No
Replace the
Go to step 2.
Pick-Up
Solenoid
(page 8-39).
Replace the
Go to step 3.
Paper Holder
Pad (page 8-8).
Replace the
Go to step 4.
Pick-Up Roller
(page 8-11).
Replace the
Replace the
Feed Sensor
Main Controller
(page 8-49).
Board
(page 8-62).
Phaser 3250 Laser Printer Service Manual