Xerox Phaser 3250 Service Manual page 103

Error Messages and Codes
3-12
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the Fuser for any paper jam
1
inside the Fuser.
2. Is there paper in the Fuser?
2 1. Check the Exit Sensor for damage.
2. Is the Exit Sensor damaged?
1. Check the Exit Actuator for damage.
3
2. Is the Exit Actuator damaged?
4 1. Check the Guide Claws for damage.
2. Are the Guide Claws damaged?
Yes No
Remove paper Go to step 2.
from the Fuser.
Clean the
surface of the
Pressure Roller.
Roller #1
(page 8-20)
Roller #2
(page 8-22)
Replace the Exit Go to step 3.
Sensor
(page 8-55).
Replace the Exit Go to step 4.
Actuator
(page 8-54).
Replace the Complete.
Fuser
(page 8-13).
Phaser 3250 Laser Printer Service Manual