Table of Contents
Advertisement
2
Program
Registering into the [Program] the destination and communication functions,
you can call the information of registration only by pressing the [Program]
key.
!
Detail
[Address Book], [Group] and [Program] can be also registered using the
Web Connection. Using the Web Connection, setting can be changed or
addresses can be registered from a computer connected to the network.
Refer to the "Web Connection" on page 13-3 or User manual [Network
Scanner Operations] for the method to use the Web Connection.
You can register the Scan Setting and Comm. Setting functions. For
details, see "Registering the program" on page 10-25.
This section describes procedures for registering into the [Program] the
registration name and destination.
1
Press [Utility/Counter] on the control panel to open the Utility Mode
screen if it is not already displayed.
–
For the Program, up to 400 (001 to 400) can be registered.
2
Press [One-Touch Registration].
–
In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [One-
Touch Registration], enter the "1" on the keypad.
3
Press [Fax].
4
Press [Program].
2-12
Before use
CS172
Advertisement
Table of Contents
