Re-Tx User Box - Oce CS172 FK-502 User Manual

Transmission

Re-TX user box

If the transmission is not yet effected even after the redialing frequency set
as the [Number of Redials] in the Telephone Line Settings is finished, the job
is saved in the Re-TX User Box. Jobs in the Re-TX User Box can be redialed
manually.
0 To use the Fax Retransmit function, [Incomplete TX Hold] should have
been set to ON in the Function Setting in the Utility Mode. Refer to
"Incomplete TX hold" on page 11-55 for the Incomplete TX Hold.
1
Press [Box] on the control panel.
2
Press [System User Box] tab.
3
Press [Re-TX User Box].
4
Select a job to be retransmitted and press [Fax TX].
5
Check the address and press [Start].
– Address can be changed.
The job is retransmitted.
CS172
3
3-35