Table of Contents
Advertisement
Appendix
Terms
M
O
P
CS172
Description
Manual transmis-
This operation to send documents while confirming the
sion
status of the receiving machine.
Memory
The location to store data. It is used to specify the com-
munication or store the document.
Memory overflow
The state of the fax image memory in this machine to be
full during storing transmitted document.
Memory RX
The function to store the received document and print the
document as necessary.
Memory Substitute
The function to store transmitted document in the memory
Reception
automatically when the received document cannot be
printed due to the machine being out of paper.
Memory transmis-
In this transmission method, all pages being sent are first
sion
scanned and stored in memory before transmission. The
document is automatically numbered by total page
number, and the images on the first page are shown on
communication results report.
However, when a large number of pages are sent or when
the images on the originals are fine, memory capacity may
be exceeded due to the large amount of data stored in
memory.
Mixed Original
The function to set and send document pages of mixed
sizes by a single sequence of operations.
Original size set
The function to designate the paper size for the document
to be sent. Normally, when the paper size loaded at the
destination is too small to accommodate the image being
transmitted, the original image will be reduced to fit the
paper size. This feature gives you the option printing a
portion of the image with no reduction.
Originating station
The facsimile to provide instruction to send document to
multiple stations.
Overseas TX
The international communication. In Overseas TX, a lower
baud rate will be employed. Select this mode if you send
a fax to the location at which the communication condition
is poor even if it is in your country.
Password TX
The function to send fax with a password. Sender has to
send a fax with the same password which is set in Closed
Network RX if the Closed Network RX is set at the recipi-
ent.
Pause
To dial at certain intervals. Pressing the key once creates
an interval of one second.
Polling
The function to send a fax that has been read and stored
in the memory in the facsimile when a polling command is
sent from the recipient.
Program
The function to register frequently-used fax numbers as
well as templates of operating sequences. Thereafter, you
may select the destination or designate a sequence of op-
erations by pressing the Program key (in the abbreviated
dialing list).
14
14-9
Advertisement
Table of Contents
