Table of Contents
Advertisement
3
4
Press [OK].
–
To cancel the setting, press [Cancel].
The Quick Memory TX is set to return to the fax screen.
5
Set other functions if necessary.
–
See "Setting transmission conditions" on page 3-12 for setting
functions on the fax screen. See "Opening the scan setting screen
and comm. setting screen" on page 7-3 for setting functions on the
fax Application screen.
6
Designate the destination.
–
For details, see "Selecting one destination" on page 3-22.
7
Set the original document.
–
For details, see "Placing the original on the machine" on page 3-7.
8
Press [Start].
The FK-502 reads the document and stores it in memory as a reserved
document before transmission starts.
!
Detail
Data is stored once in the memory when the line is busy. And the
transmission is started when the line becomes ready for use.
To cancel transmission, see "Canceling transmission" on page 3-39.
If the destination is not ready to receive, your call will be redialed. For
information about redialing, see "Recently dialed" on page 3-31.
If transmission fails, see "Cannot send messages" on page 5-3.
3-46
Transmission
CS172
Advertisement
Table of Contents
