Multi Lines Setting - Oce CS172 FK-502 User Manual

Utility mode

Multi lines setting

Set the transmission method for the Line 2 Setting.
Item
Multi Lines Setting
*
indicates factory default setting.
1
Open the Administrator Setting screen (See "Entering administrator
setting" on page 11-4).
2
Press [Fax Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.
3
Press [Multi Lines Setting].
CS172
Description
Line 2 Setting Set the communication
method for the Line (addi-
tional line).
11
Available value
*
TX and RX / RX
Only / TX Only
11-79