3
–
Tone
When using a rotary dialing (pulse) telephone line, press Tone to
select push-button tone mode. This is used when using a fax
information service and so forth when Tone is selected. A "T" is
displayed on the screen.
–
In case of the dial (pulse) line, you can switch it to the push-button
tone using the asterisk
–
Pause
Press [Pause] to insert a space in a dialed number. Pressing [Pause]
once creates an interval of one second between numbers. Multiple
spaces can also be entered. A "P" is displayed on the screen.
–
When the PBX connection is [ON] and a call is made from the
internal line to the outside line, press [Pause] after the outside line
number such as "0" so that dialing is made more surely. "P" is
displayed on the screen.
–
-
This is entered as a separation symbol when dialing. It has no effect
on dialing. A "-" is displayed on the screen.
–
Abbr. Dial
Enter the Abbreviated dialing number (up to 2,000 from 0001 to
2000) through the keypad and specify the destination registered in
the Address Book.
On the screen, A abbr. number: Destination name is displayed as
seen in the example "A0001: fax1".
–
Scan to E-Mail
An E-Mail attached with an image is sent.
–
When the destination is an E-Mail address, the Subject of the E-
Mail, the Text, the File Name of image, and the From of the sender
can be set manually. For details, see "Setting transmission
conditions" on page 3-12.
–
No sending or reception of a fax in color is available. If you want to
send an image in color, use the Scan function. For more information
of the Scan function, see User manual [Network Scanner
Operations].
–
Recently Dialed #
A fax transmission is made to the destination to which transmission
was made previously.
–
For details of Recently Dial #, see "Recently dialed" on page 3-31
–
Save in User Box
An image is saved in the internal hard disk.
3
Press [Start].
Transmission begins.
3-28
key.
Transmission
CS172