Table of Contents
Advertisement
Registering/Settings
7
When setting [Scan Setting] or [Comm. Setting], press [Yes] to set the
scanning or communication function and then press [OK].
–
In the screen displayed by pressing [Comm. Setting] - [E-Mail
Setting], [E-Mail Notification] can be set.
–
When [E-Mail Notification] is set to [ON], after completion of the job,
the end of the job can be confirmed by sending an E-Mail to the
destination of [E-Mail Notification].
–
For details of [Scan Setting], [Comm. Setting], see "Transmission
applications" on page 7-3.
8
Press [Close].
–
To stop registering, Press [Cancel].
When proceeding with the registration of the Program, go to Step 3.
9
Press [Exit] on the sub-area.
CS172
10
10-29
Advertisement
Table of Contents
