Transmission applications
1
Press [Fax] on the control panel to view the fax screen, if it is not
already displayed.
2
Press [Comm. Setting].
3
Press [F-Code TX].
4
Enter Box No. of the receiving station in the box of SUB Address. Press
[Password] and then enter the password with keypad if necessary.
–
SUB Address and Password can be numbers of up to 20 digits.
–
When communicating with the FK-502, input 9 digits or less for the
Box No. and 8 digits or less for the Password. The required digits
are different depending on the device.
–
Numerals between 0-9, and symbols # and * can be used for
Password.
–
To correct a wrong entry, use [Del.].
–
Press [C] (clear) to clear the whole entry.
–
To release the setting, press [OFF].
If a password is needed, press YES and enter the password.
CS172
7
7-35