Tx Report - Oce CS172 FK-502 User Manual

12
12.3

TX report

Manual printout
The TX Result Report Check screen appears at the transmission if [ON] is
selected at [Report Settings]-[TX Report] by the Utility Mode.
Press [YES] to print the TX result report. Press [NO] to not print the report.
For details, see "Report settings" on page 11-70.
Automatic printout
Automatic printout can be set to [ON], [If TX Fails] or [OFF] with [TX Report]
at [Report Settings] of Utility Mode. For details, see "Report settings" on
page 11-70.
*
The actual reports may be different from the reports in this manual.
Item
Destination:
Start Time:
Time:
Prints:
12-10
Description
The following is shown.
• Name when name is registered in abbreviated dialing or entry list
• Destination telephone number
The time at which communication started is shown.
Time required for a communication is shown.
The number of pages transmitted is shown. In the case of memory
transmission, the number of pages able to be transmitted and the total
number of pages are shown in the form of a fraction.
Explanation of reports and lists
CS172