Table of Contents
Advertisement
Transmission applications
4
Press [ECM OFF].
–
To release the setting, press [ECM OFF] again.
–
This is the screen when the optional Fax Multi Line is installed.
5
Press [Yes] when doing [Check Destination].
–
By setting [Check Destination] to [Yes], erroneous transmission can
be prevented.
6
Press [OK].
The Comm. Setting screen will be restored.
7
Press [OK].
The fax screen will be restored.
8
Set other functions if necessary.
–
See "Setting transmission conditions" on page 3-12 for information
about setting functions in the fax screen. See "Application
functions overview" on page 7-5 for information about setting
functions in the Fax Application Menu.
9
Designate the destination.
–
See "Selecting one destination" on page 3-22 for designating the
destination.
10
Set the original document.
–
See "Placing the original on the machine" on page 3-7 for
information about setting the document.
11
Press [Start].
The FK-502 starts transmission.
CS172
7
7-41
Advertisement
Table of Contents
