Figure 2: Rear Panel - Edge-Core ECS5610-52S Installation Manual

Chapter 1
| Switch Description
Overview

Figure 2: Rear Panel

1
Fan Tray Module
USB Port
A USB port is provided on the switch front panel. This port is for transferring
configuration files from a USB storage device to the switch's flash memory. For
more information, see "How to Connect to the USB Port" on page
Reset Button
Pressing the reset button on the front panel causes the switch to preform a hard
reset. For more information, see
System LEDs
For information on system status LED indicators, see
Status LEDs" on page 48.
Port LEDs
For information on port status LED indicators, see
LEDs" on page 35.
Power Supply Modules
The switch supports dual hot-swappable AC power supply units (PSUs). You can
install up to two PSUs with matching airflow direction in the switch. For more
information on the switch power supplies, how to install them, and how to power-
on the switch, see "Power Supply Modules" on page
Fan Tray Module
The fan tray module provides air cooling for the switch system. For more
information, see "Switch Cooling Requirements" on page
"How to Reset the Switch" on page
1
2
Power Supply Modules
– 12 –
52.
53.
"Understanding the System
"Understanding the Port Status
2 2
29.
26.