Star Trac E-UB Installation Instructions Manual page 7

Hide thumbs Also See for E-UB:

Step 9.

Take upper display and neck assembly to the

front of the unit. Feed the cables from the lower

neck through the upper neck.

Note: It may be necessary to have one person sup-

port and position the display while a second person

feeds the cables.

Step 11.

Thread in (4) M8 x 20 flat head screws in the

front and back of the neck where the two pieces

came together. Tighten the screws to 150 lb-in

of torque.

Step 10.

Keep hold of the cables and rotate the display

up. Now slide the neck over the two mounts in

the lower neck.

Caution: Take care not to pinch the cables or your

finger when the two pieces come together

Step 12.

Identify cables coming out of neck and handlebar:

1.Heart rate cable

2.Main I/O cable

3.Coax cable

4.DC power cable

Note: If unit is not equipped with Personal Viewing

Screen, the coax and DC power cables should be

tucked down the neck for possible future use.

620-7922 Rev B