Star Trac E-UB Installation Instructions Manual page 20

Hide thumbs Also See for E-UB:

(E-UB/RB) iPod® CENTER CONSOLE INSTALLATION INSTRUCTIONS

Step 1.

Remove all contents from the packaging and

verify that you have the following parts:

1. (1) iPod® center console.

2. (1) iPod® cradle.

3. (1) Owner's manual.

4. (1) Cable kit.

5. (1) Lower back cover.

Note: If the center console is being installed on a

new unit, then perform this installation prior to

mounting the display assembly onto the frame.

Step 3.

Using a #2 Phillips screwdriver, remove the (8)

screws on the back of the display plastic. Set

the screws aside, you will need them for re-

assembly.

Step 2.

Verify the cable kit has the following two parts:

1. (1) Center console power cable.

2. (1) Headphone jack and mount.

Step 4.

Carefully open the display plastic, so as to not

detach the inner cables from the display.

620-7922 Rev B