Star Trac E-UB Installation Instructions Manual page 45

Step 13.
Using a #2 Phillips head screwdriver, remove
the (4) screws that hold the bottom cover of the
display console, then remove the (1) screw that
holds the headphone jack cap.
Note: Retain screws for later use.
Step 15.
Using a Phillips head screwdriver, remove the
(4) screws that hold the original center console
in place, then remove the center console.
Note: You will no longer need the center console
and it can be stored away for any possible future
use.
58
Step 14.
Next remove the bottom cover, then remove the
headphone blank cover.
Note: You will no longer need the headphone jack
cover and it can be stored away for any possible
future use.
Step 16.
Insert the new center console into the front dis-
play. Using a #2 Phillips screwdriver, screw in
and secure the (4) screws that were saved from
the original center console.
620-7922 Rev B