Star Trac E-UB Installation Instructions Manual page 34

1
Step 13.
Identify the cables coming out of the new center
console:
1. Center console keypad ribbon cable.
2. Center console power cable
3. Center console ground cable.
4. Seven-pin interface cable.
Step 15.
Connect the seven-pin interface cable from the
console to J14 connector on the display board.
47
3
2
4
Step 14.
Connect the center console keypad cable to J8
connector on the display board.
Step 16.
Take the center console power cable and attach
the male 12 pin connector to the female 12 pin
connector on the display board.
620-7922 Rev B