Star Trac E-UB Installation Instructions Manual page 6

Step 5.
Attach right pedal to right pedal crank, then
tighten securely.
Note: For right pedal turn clockwise to tighten.
Step 7.
Remove the packaging tape that holds the dis-
play assembly together, then separate the back
of the display from the front.
8
Step 6.
Attach left pedal to left pedal crank, then tighten
securely.
Note: For left pedal, turn counterclockwise to
tighten.
Step 8.
Next, un-plug the heart rate cable from the HR
board connector on the display board, then re-
move the front of display.
Note: Place the display in a safe place for later use.
620-7922 Rev B