Star Trac E-UB Installation Instructions Manual page 23

Step 13.
Now install the new head phone jack mount.
Use the screw saved from the earlier step to se-
cure the mount to the display.
Step 15.
Connect the center console keypad cable to J8
connector on the display board.
36
1
Step 14.
Identify the cables coming out of the new center
console:
1. Center console keypad ribbon cable.
2. Headphone jack cable.
3. Center console ground cable.
4. Seven-pin interface cable.
Step 16.
Connect the seven-pin interface cable from the
console to J14 connector on the display board.
2 3
4
620-7922 Rev B