Star Trac E-UB Installation Instructions Manual page 26

Hide thumbs Also See for E-UB:

Step 25.

Take the front display plastics with the new cen-

ter console to the base unit. Hold the front dis-

play plastics at the top with one hand while con-

necting the cables and harnesses with the

other.

Step 27.

Plug-in the 12-pin main I/O cable from the neck

into the new 12 pin adaptor.

Step 26.

Identify the four cables coming out of the neck

and mounting bracket:

1. Heart rate cable

2. Main I/O cable

3. Coax cable

4. DC power cable

Note: The coax and DC power cables are part of the

PVS and embedded kits and should be tucked down

the neck for possible future use.

Step 28.

Next, plug-in the heart rate cable from the neck

into the heart rate board connector on the dis-

play.

620-7922 Rev B