Star Trac E-UB Installation Instructions Manual page 10

Hide thumbs Also See for E-UB:

Use the checklist below to ensure the proper installation of the E Series Upright Bike:

1.All parts and hardware in the package are accounted for.

2.All screws are tightened down to their specified values.

3.Upper neck is properly mounted and secured to the lower neck.

4.Left and right pedals are properly mounted and secured.

5.All cables and harnesses are properly plugged into their respective connectors.

6.The front and back display plastics are properly installed and secured.

7.Unit is leveled to the floor.

8.Once powered up, all features of the unit function properly.

9.Using a chest strap or wireless heart rate simulator, verify heart rate is recording properly.

ATTENTION

Star Trac recommends that the bikes be spaced a minimum of 20.0 inches (0.5 m) apart to allow

•

safe and easy ingress and egress. Even more importantly, there must be at least 48 inches

(1.25 m) of free space behind the bike.

As with any motorized equipment, the area where bikes are located must be free of obstructions

•

and fixtures with sharp edges to prevent injury in the event that a user trips or loses balance and

falls.

For technical assistance call Star Trac Customer Service: 1 800 503 1221

620-7922 Rev B