Star Trac E-UB Installation Instructions Manual page 32
Hide thumbs
Also See for E-UB:
- Owner's manual (42 pages) ,
- Installation manual (15 pages) ,
- Owner's manual (36 pages)
Advertisement
Step 5.
Disconnect the 12-pin serial connector from the
display.
Step 7.
Be careful with the display and place it face
down on top of a non-scratching surface to
protect it from being damaged.
45
Step 6.
Now disconnect the heart rate connector from
the display.
Step 8.
Using a #2 Phillips head screwdriver, remove
the (4) screws that hold bottom side of the dis-
play console on, then remove the (1) screw that
holds the headphone jack cap.
Note: Retain screws for later use.
620-7922 Rev B
Advertisement
