Star Trac E-UB Installation Instructions Manual page 28

Hide thumbs Also See for E-UB:

Use the checklist below to ensure the proper installation of iPod® kit on the E-Bike:

1. All parts, tools and hardware in the package are accounted for.

2. Center console assembly is properly mounted and secured.

3. All screws are tightened down to their specified values.

4. Display's mounting bracket and back cover are properly mounted and secured.

5. All cables and harnesses are properly plugged to their respective connectors.

The iPod® controls on center console are functioning and user can browse and listen to music.

7. Headphone jack produces clear audio on both sides of earphone

ATTENTION

Star Trac recommends that the bikes be spaced a minimum of 20.0 inches (0.5 m) apart to allow

•

safe and easy ingress and egress. Even more importantly, there must be at least 48 inches

(1.25 m) of free space behind the bike.

As with any motorized equipment, the area where bikes are located must be free of obstructions

•

and fixtures with sharp edges to prevent injury in the event that a user trips or loses balance and

falls.

For technical assistance call Star Trac Customer Service: 1 800 503 1221

620-7922 Rev B