Star Trac E-UB Installation Instructions Manual page 3

(E-UB) UPRIGHT BIKE UNPACKING INSTRUCTIONS
Step 1.
Place the box with heavy end facing down in the
area where the unit is going to be assembled.
Cut and remove packaging straps.
Step 3.
Carefully remove the display and neck assembly
from the box. Unwrap and place the assembly
on a non-scratching surface.
5
Step 2.
Open the box and remove top cover. Then re-
move items from top packaging foam.
Step 4.
Lift the unit off of the box base and place it on
the floor. Remove packaging materials.
620-7922 Rev B